Kambrook Speed Chute KFP200, Instruction Booklet

Page: 7 / 24

6
Important Safeguards For All
Electrical Appliances
• Fully unwind the power cord
before use.
• Connect only to 230V or 240V
power outlet.
• Do not let the power cord hang over
the edge of a bench or table, touch
hot surfaces or become knotted.
• To protect against electric shock, do
not immerse the power cord, power
plug or appliance in water or any
other liquid, unless it is recommended
in the cleaning instructions.
• The appliance is not intended for
use by persons (including children)
with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of the
appliance, by a person responsible
for their safety.
• Children should be supervised to
ensure that they do not play with
the appliance.
• It is recommended to inspect the
appliance regularly. Do not use
the appliance if the power supply
cord, plug, connector or appliance
becomes damaged in anyway.
Return the entire appliance to
the nearest authorised Kambrook
Service Centre for examination
and/or repair.
• Any maintenance other than
cleaning should be performed at an
authorised Kambrook Service Centre.
• This appliance is for household use
only. Do not use this appliance for
other than its intended use. Do not
use in moving vehicles or boats.
Do not use outdoors.
Misuse may
cause injury.
• The installation of a residual
current device (safety switch)
is recommended to provide
additional safety protection when
using electrical appliances. It is
advisable that a safety switch with
a rated residual operating current
not exceeding 30mA be installed in
the electrical circuit supplying the
appliance. See your electrician for
professional advice
• Always turn the appliance to the
OFF position, switch off at the
power outlet and unplug at the
power outlet when the appliance is
not in use.
• Before cleaning, always turn the
appliance to the OFF position,
switch off at the power outlet,
unplug at the power outlet
and remove the power cord, if
detachable, from the appliance
and allow all parts to cool.
• Do not place this appliance on or
near a heat source, such as hot
plate, oven or heaters.
• Position the appliance at a
minimum distance of 20cm away
from walls, curtains and other heat
or steam sensitive materials and
provide adequate space above
and on all sides for air circulation.
CAUTION: The processing
blade and disc are
extremely sharp, handle
with care at all times. Do
not place hands, knives, or
other utensils into the feed
chute. Always use the food
pusher to push the food
down the feed chute.