background image

4

Kambrook Recommends Safety First

IMPORTANT: Please retain your 

instruction book for future use.

At Kambrook, we believe that safe performance is the first priority in any 

consumer product, so that you, our valued customer can confidently 

use and trust our products. We ask that any electrical appliance that 

you use be operated in a sensible fashion with due care and attention 

placed on the following important operating instructions.

Important Safeguards For Your Kambrook  

Speed Chute Processor

• Carefully read all instructions 

before operating the Kambrook 

Food Processor for the first time and 

save for future reference.

• Remove and safely discard 

any packaging material and 

promotional labels before using the 

Food Processor for the first time.

• To eliminate a choking hazard for 

young children, remove and safely 

discard the protective cover fitted 

to the power plug of this appliance.

• Do not place the Food Processor 

near the edge of a bench or 

table during operation. Ensure the 

surface is level, clean and free of 

water and other substances.

• Do not use the Food Processor on a 

sink drain board.

• Do not place the Food Processor  

on or near a hot gas or electric 

burner, or where it could touch a 

heated oven.

• Handle the Food Processor and 

attachments with care – remember 

the blades and discs are razor-

sharp and should be kept out of 

the reach of children.

• Use the blade protector when 

storing the processing blade.

• Always ensure the Food Processor 

is completely assembled before 

operating. The appliance will not 

operate unless properly assembled.

• Ensure the control switch dial is in 

the ‘OFF’ position and the Food 

Processor is switched off at the 

power outlet and the power cord 

is unplugged before attaching 

the processing blade, discs or 

processor lid.

• Always secure the processor 

bowl onto the motor base before 

attaching the processing blade  

or discs.

• Ensure the processor lid is securely 

locked in place before operating. 

• Do not remove the processor  

bowl from the motor base whilst  

in operation.

• Do not push food into the feed 

chute with your fingers or other 

utensils. Always use the food  

pusher provided.

Summary of Contents for Speed Chute KFP200

























Reviews: