Kambrook KFP600 Instruction Booklet Download Page 19

Page: 19 / 32

The Stainless Steel Grating Disc

For all foods, pack the feed chute firmly to ensure even results. Although firm

pressure on the food pusher is recommended for some foods, do not press

hard as the disc may jam.
ALWAYS use the food pusher when using the grating disc.

Ingredients

Procedure

Potatoes and Root
Vegetables

Pack into the feed chute and process using firm pressure.
Peel and cut into pieces if necessary to fit the feed chute.

Carrots, Zucchini and
Cucumber, Onions

Prepare the vegetables and pack into the feed chute.
Packing vertically will give shorter shreds than packing
horizontally. Process using firm pressure.

Cheese

Cut the cheese to fit the feed chute snugly. Process using
a light pressure on the food pusher to prevent the
cheese crumbling.

Chocolate

Break chocolate into pieces to fit the feed chute and process
using firm pressure.

The Stainless Steel Chipping Disc

The chipping disc makes chips from potatoes and also pumpkin, zucchini,

or sweet potato for something a bit different!
For all foods, pack the feed chute firmly to ensure even results. Although firm

pressure on the food pusher is recommended for some foods, do not press

hard as the disc may jam.
ALWAYS use the food pusher when using the chipping disc.

Ingredients

Procedure

Potatoes, Sweet
Potatoes, Zucchini
and Pumpkin

Pack into the feed chute and process using firm pressure.
Peel and cut into pieces if necessary to fit the feed chute.

Blade Operating Guide

continued

Summary of Contents for KFP600

































Search results

Summary of Contents for KFP600

Reviews:

Related manuals for KFP600

Brands by name

Popular brands

Kambrook KFP600, Instruction Booklet

Search results

Summary of Contents for KFP600

Reviews:

Related manuals for KFP600

Brands by name

Popular brands