Kambrook KFP600 Instruction Booklet Download Page 14

Page: 14 / 32

Disassembling the Food

Processor Bowl

Remove Spindle 2 from the Food

Processor bowl.

With one hand holding the motor

base and the other holding the

handle of the Food Processor

bowl, turn the bowl clockwise

so that the ‘

ALIGN

’ symbol on the

Food Processor bowl is directly

above the ‘

ALIGN

’ symbol on

the motor base. Pull the Food

Processor bowl away from the

motor base to remove.

Remove Spindle 1 from the

motor base. The motor base

is now ready to assemble the

Blender jug.

Assembling the Blender

Place the motor base on a flat,

dry surface such as a bench top.

Make sure that the appliance is

switched off at the power outlet

and the power cord is unplugged

from the outlet.

Place the Blender jug onto the

motor base. Align the ‘

ALIGN

’ symbol

found on the lower edge of the

Blender jug with the ‘

ALIGN

’ symbol

found on the motor base. Turn the

Blender jug anti-clockwise until the

‘

ALIGN

’ symbol found on the Blender

jug meets the ‘

LOCK

’ symbol on the

motor base. Once aligned, the

Blender jug will be locked onto

the motor base and secure.

NOTE:

The Blender will not

operate unless the Blender jug is

correctly positioned and locked

onto the motor base.

Operating the Blender

Ensure the control dial is in the

‘OFF’ position.

Insert the power plug into a 230V

or 240V power outlet and switch

the power on at the power outlet.

Place the ingredients to be

blended into the Blender jug.

NOTE:

Do not overfill the Blender

jug above the 1500ml (MAX)

mark. Replace lid, turn power

on at the power outlet and

recommence blending.

To fit the Blender lid, place the lid

so that the spout cover is either

to the left or right of the jug spout

and the lid sits flat. Twist the lid

until the spout cover and jug

spout are aligned. Ensure that

the ‘filler cap’ in the centre of the

jug lid is also fitted correctly into

position. The blender is now ready

to use.

With one hand placed on top of

the blender lid, turn the control

dial from the ‘OFF’ position to

either the ‘LOW’ or ‘HIGH’ speed

setting depending on what the

recipe requires. The speed can

be changed at any time during

blending. For short bursts of power,

use the ‘PULSE’ speed setting.

If ingredients need to be added

during blending, remove the

‘filler cap’ and drop or pour

through the hole.

When blending is complete,

turn the control dial to the ‘OFF’

position, switch off at the power

out and unplug from the power

outlet. Wait until the blades have

fully stopped rotating before

removing the lid or jug.

Summary of Contents for KFP600

































Search results

Summary of Contents for KFP600

Reviews:

Related manuals for KFP600

Brands by name

Popular brands

Kambrook KFP600, Instruction Booklet

Search results

Summary of Contents for KFP600

Reviews:

Related manuals for KFP600

Brands by name

Popular brands