15
NOTE:
For further cleaning we
recommend washing the filter
cover, foam filter and plastic filter
in warm soapy water. Allow to dry
thoroughly before reassembling.
WARNING:
Never wash
the stick vacuum body,
motor unit, charging base
or turbo brush in water.
This will damage the unit.
Cleaning the Turbo Brush
Regularly check the turbo brush to
remove hair and dirt that may have
accumulated.
1. Detach the turbo brush head
from the stick vacuum body
before cleaning the turbo
brush head.
2. To detach the turbo brush head
press the turbo brush head
release button and pull away
from the stick vacuum body.
3. Remove the rotary brush from
the turbo brush head by turning
the yellow locking tab to the
‘UNLOCK’
position using a flat
head screw driver or a 10 cent
coin (see Fig.20).
Fig. 20
2. Separate the (a) filter cover and
(b) foam from the (c) plastic filter.
Remove any larger debris that
has been collected into a rubbish
bin, lightly tapping the sides if
necessary to dislodge (see Fig.18).
Fig. 18
3. Open the clear lid of the plastic
filter and remove any larger
debris that has been collected
(see Fig.19).
Fig. 19
4. Tip out any left-over debris in the
dust canister.
5. Refit the plastic filter, foam filter
and filter cover to the dust
canister ensuring it fits flush
into place.
6. Refit the dust canister to the
motor housing.
Summary of Contents for Captiv2in1 Turbo KHV500
Page 2: ...Instruction Booklet Captiv2in1 Turbo Stick Vacuum KHV500...
Page 8: ...7...
Page 20: ...19 Notes...
