Kambrook Captiv2in1 Turbo KHV500, Instruction Booklet

Page: 12 / 20

11
6. To maintain charge, keep the
power cord plugged into a
standard wall outlet and charge
the stick vacuum after each
use. When charging, the battery
compartment and charging
base may be warm to touch;
this is normal. It is impossible to
overcharge the battery because
the stick vacuum is designed with
overcharge protection circuitry.
WARNING:
Always
recharge the stick vacuum
after every use to extend
the life of the battery.
WARNING:
Never use
any other battery other
than that provided with
the stick vacuum. Do
not attempt to use the
charger with any other
product.
To operate the stick vacuum
1. Once the stick vacuum is fully
charged, the charging indicator
light located on the handheld
vacuum will illuminate green.
Remove the stick vacuum from
the charging base for use.
2. Holding the stick vacuum handle,
press the power On/Off button to
commence vacuuming and glide
the stick vacuum back and forth
over the floor surface in a steady
motion.
3. The green power indicator light
will illuminate green indicating
that vacuum is working and the
turbo brush will begin rotating,
picking up floor surface debris.
4. Once vacuuming is complete,
press the power On/Off button to
cease cleaning.
5. After each use, empty the dust
canister, clean the filter (see and
replace stick vacuum on to the
charging base to recharge for
next use (see ‘Emptying the Dust
Canister’ on page 14). Replace
stick vacuum on to the charging
base to recharge for next use.
To operate the handheld
vacuum
Your stick vacuum is fitted with a hand
held vacuum designed for picking up
debris such as dirt, dust, pet hair and
food crumbs. It is suitable for use on
counters, floors, rugs, tiles, car interiors,
and upholstered furnishings.
1. To remove the handheld vacuum
from the stick vacuum body,
holding the handheld vacuum
handle, press down on the press
release button and pull outwards
away from the stick vacuum body
(see Fig.9).
Fig. 9