8
Operating Your Kambrook Stick Vacuum
Before First Use
Remove any promotional material
from the stick vacuum. When
unpacking the stick vacuum, check
to see you have received all the
required components such as,
the crevice tool, small brush tool,
upholstery tool and handle fixing
screw before discarding
the packaging.
WARNING:
Before first use,
charge the stick vacuum
for at least 24 hours.
Always ensure the stick
vacuum is turned OFF
before charging.
To assemble the charging
base and charging column:
1. Place the charging base on a flat
surface ideally situated close to a
230V or 240V power point.
2. Align the charging column to
the charging base and push
down vertically until both pieces
are securely fitted together
(see Fig.1).
Fig. 1
3. To disassemble the charging base,
press the charging base release
button and pull the charging
column upwards away from the
charging base (see Fig.2).
Fig. 2
4. Once the charging column is
assembled to the charging base,
before charging the stick vacuum,
plug the power cord on the
charging base into a 230V or 240V
power point.
NOTE:
The charging base
assembly is free standing; it does
not need to be fixed to a wall in
order to charge the stick vacuum.
To assemble the body
1. Align the stick vacuum handle
with the stick vacuum body and
slide vertically down into position
until securely fitted (see Fig.3).
Fig. 3
Summary of Contents for Captiv2in1 Turbo KHV500
Page 2: ...Instruction Booklet Captiv2in1 Turbo Stick Vacuum KHV500...
Page 8: ...7...
Page 20: ...19 Notes...
