32
OODMANUAL 0720
KAM CONTROLS, INC.
CLEANING
Properly installed and under normal operation, the KAM
®
OOD™ should not require cleaning, as the perpendicular
flow should keep the lens free of any build up.
However, in some cases it may be necessary to clean the lens of any residue. To do so, first follow the instructions
to uninstall or remove the OOD from the pipeline (page 11) and place the OOD on a flat surface. Use a clean cloth
with oil solvent or part washer to carefully clean the lens at the tip of the probe. Preferred solvents include, any
petroleum solvent such as mineral spirits, gasoline, or diesel. Do not use WD40 or other chemicals.
If you have a question regarding cleaning solvents, please contact KAM Controls directly at +1 713 784-0000
or email: [email protected]
5 M A I N T E N A N C E
