Kalmar TL2, Maintenance Manual

Page: 113 / 216

ETCHING AND PITTING
– There is damage on the rollers and on the surfaces of the
cup and the cone inner race that touch the rollers.
SPALLING
AND
FLAKING
– There is damage on the cup and the cone inner surfaces
that touch the rollers.
Lubricate the king pins and bushings
1
Park the vehicle on a level surface. Block the wheels to pre‐
vent the vehicle from moving. Set the parking brake.
2 Verify that the tires touch the ground. Do not raise the vehicle.
The full weight of the vehicle must be on the axle assembly.
3 Clean all grease fittings before you lubricate the king pins.
4 Lubricate the king pins through the top (A) and bottom (B)
grease fittings.
A A
B B
5 Steering – 5.2 Power assisted system 5
TL2 Maintenance Manual
591 003 Default