INSTALLATION INSTRUCTIONS
In-Wall Tank and Carriage
1206758-2-C
Questions? Problems? For additional assistance, please contact KALLISTA’s Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or kallista.com.
6 of 12
4. INSTALL THE CARRIAGE
Front View
Threaded
Rod
Lag Bolt
Leg
Move the carriage into place in the stud pocket.
Temporarily secure the carriage in place so it will not fall.
Align the carriage fl ush with the front edge of the studs. The front of the carriage should be fl ush with the
front edge of the studs or set back slightly for fi nished wall installation.
Check the front of the carriage for plumb.
Mark the hole location for each foot.
Drill a pilot hole (remove the carriage if needed) to reduce the risk of the lag bolt causing the stud to split or
crack.
Secure the feet of the carriage to the studs using 2” (51 mm) long (minimum) lag bolts (not supplied).
Install the threaded rods several turns into the carriage.
