10
Installation instructions
Step 1: Check the door balance
1
Hold the top of the dishwasher firmly.
2
Open the door slowly, then release it. If the door drops, increase the spring tension. If the door closes, decrease the
spring tension.
3
Continue moving the spring pin until the door is balanced. Adjust both springs to the same tension.
Step 2: Adjust the leveling legs
1
Move the dishwasher close to the installation location and lay it on its back.
2
Measure the installation height and the dishwasher height.
3
Extend the leveling legs out from the dishwasher base .25 in. (6.35 mm) less than the installation height.
Caution:
• Opening the door of your dishwasher before it is installed will cause it to tip forward. Do not open the door until you are ready to
install your dishwasher.
• If it is necessary to open the door, hold the top of the dishwasher securely with one hand and hold the door with the other hand.
Note:
Make sure that the leveling feet are loosened before standing the dishwasher upright. They may be tight from
shipping/packaging.
Increase
Decrease
Adjust to .25 in. (6.35 mm)
less than the installation
height
Adjust to .25 in. (6.35 mm)
less than the installation
height
