USER MANUAL STARTER
26
TRANSLATED FROM ORIGINAL VERSION: EDITION 1
11. LAMINATION INCIDENTS
12. MAINTENANCE
User maintenance is limited to current maintenance as described in #8.
In case of a change of plug, only use a plug type CEI 60309-1.
Pour tout aut
res cas de défauts, contacter l’installateur agrée par le constructeur.
13. RECYCLING
Starter laminator contains no components harmful to the environment. The disposal of your Starter
must be collected by a recycling company.
The Starter is designed and constructed so that the noise emitted during operation is lower than 70
dB.
The print folds or waves
during lamination.
The print is fed too quickly
The print has not been fed flat
Paper too light or not dry
enough
Hold the print more firmly when
feeding it
Fold in the length of the film
a)
Use the brake to remove the
fold
b)
Check the way the films are
loaded on the machine.
The print is curling to the top
Too much tension on the upper
film
Both films on top and bottom
should have a similar tension.
Correct the brake on both
Both films on top and bottom
should have a similar tension.
Correct the brake on both
The print is curling to the
bottom
Too much tension on the lower
film
P
ROBLEME
P
OSSIBLE CAUSE
A
CTION
The tension on the film is too
light
