USER MANUAL STARTER
20
TRANSLATED FROM ORIGINAL VERSION: EDITION 1
6. APPLICATIONS
3.
Raise the upper roller high enough
regarding to the thickness of the board.
(refer to § 5.3).
4.
Place the board with the print on the
feeding tray between the rollers.
5.
Adjust the roller pressure (refer to
#5.3) based on the width of the board
and regarding our pressure adjustment
recommendations (refer to § 7.1), while
laying the print on the surface of the
upper roller.
Remove the release paper from the back
of the print up to the top of the upper
roller
6.
Start the machine with the foot pedal.
Remove the release paper manually
while the board and print are being fed.
When doing this, try to keep the widest
possible part of the print in contact with
the upper roller.
.
