USER MANUAL STARTER
10
TRANSLATED FROM ORIGINAL VERSION: EDITION 1
5.ADJUSTMENTS AND RECOMMENDATIONS
Reverse :
Select the working mode selection switch to
reverse (Rep.E). The LED indicator (Rep.C)
should turn to orange. Press on the foot pedal to
start operating the machine into reverse motion.
5.3 Roller pressure adjustment
The laminator Starter has got a manual
pressure adjustment system and roller
elevation mechanism. It allows to process
thick material (Max. thickness : 50 mm
/ 2”).
Roller nip adjustment :
Turn the roller elevation handle (Rep.3) until
you reach the required nip. You can read an
indication about the nip in mm on the
graduated scale on the right side of the
machine (Rep.21) according to the thickness
indicator
(Rep.22).
Turning
the
handle
clockwise will bring the upper roller down in
contact with the lower roller or the media for
further pressure adjustment.
Roller pressure adjustment :
When upper roller is in contact with the
material or the lower roller, keep turning the
handle clockwise to increase the pressure
(Rep.3).
The LED pressure gauge light (Rep. 12) will
change colour depending on the amount of
pressure applied.
Keep turning the handle to reach the required
amount of pressure.
+
3
12
10
21
21
12
22
-
: OFF : No pressure
-
: GREEN : Low pressure
-
: ORANGE : Intermediate pressure
-
: RED : Maximum pressure
