USER MANUAL STARTER
5
TRANSLATED FROM ORIGINAL VERSION: EDITION 1
2.
THE RECEPTION OF YOUR LAMINATOR
2.1
Definition of your working space
Before unpacking your machine, it is necessary to
determine your working space area. You should
have easy access to all the parts of the machine
.
When mounting onto rigid boards, make sure that
you will have at least one meter free space on top of
the maximal length of your boards in front and in
rear of the machine
.
Use of movable tables, which height corresponds to
the feeding table of the laminator is recommended.
Your laminator should be positioned in the center of
this area and the user will secure it in position by
locking the castors on the stands in order to avoid
any unexpected move while working.
2.2
Unpacking the laminator
Remove the carton crate. Accessories, film shafts
and stand are inside the pallet. Remove them out of
the pallet.
Unscrew the 4 screws fixing the machine on the pallet.
2.3 Laminator stand assembly
The components of the stand are in a separate carton.
To assemble the stand, refer to the instruction inside the
carton.
2.4 Positioning of the laminator on the stand
The machine is heavy. 2 persons are
required to position the machine on its
stand.
Take the machine by the plastic side.
Handle the machine with care.
The holes on the stand should align with the holes in the
laminator chassis. Screw the machine to the stand with
the screws delivered with the stand.
