67
29.1
Explanation of interface
LED indicator lights:
Red
Flashing slowly: the iMatch is starting up.
Steady light: the iMatch is ready for configuration via the application.
Flashing rapidly: the iMatch has been reinitialised to the factory setting and is
restarting.
Green
Steady light: the iMatch is ready to be controlled by the application.
Red / Green (flashing)
The iMatch cannot establish a connection with the Wi-Fi network.
When the red and green lights are flashing, two problems are possible:
1
The distance between the Wi-Fi source and the iMatch is too large. Reduce
the distance between the iMatch and the Wi-Fi source.
2
The Wi-Fi parameters have not been correctly entered in the application.
Check the Wi-Fi parameters. Delete the room/fire that has been added in
the application. Reinitialise the iMatch and try again.
Reinitialisation button (Reset)
To reinitalise the iMatch, hold down the Reset button until the red LED indicator
light starts to flash rapidly (around 15 seconds).
29.2
Programming the iMatch
1
Download the iMatch application from the online application platform of your smartphone or tablet.
2
Navigate to your Wi-Fi parameters.
3
Select the Wi-Fi network ‘Kalfire’.
4
Open the iMatch application.
5
Press the ‘ + ‘ button.
6
Select the iMatch application that has just been located.
7
Give the iMatch a name (for example, ‘Living room’) and enter your Wi-Fi parameters. Note: the name and the password of
your Wi-Fi network are case sensitive. If the name or the password of the Wi-Fi connection are incorrect, the interface must be
reinitialised.
8
If the Fairo is a hybrid fire, configure it as such (check the identification plate).
9
Press ‘Add a fire’ (this procedure can be repeated for a maximum of four fires).
10
Wait 40 seconds.
11
Reestablish the Wi-Fi connection (the connection should be established automatically).
12
The fire can now be controlled by the iMatch application.
29.3
Configuration of the iMatch application
The configuration screen of the iMatch application allows the following parameters to be adjusted:
1
Modification of room names. Select the room that you want to rename. The name can be modified on the following screen.
2
Specification of a hybrid fire.
3
Modification of the order of the rooms by dragging and dropping a room towards the top or bottom of the list of rooms.
4
Deletion of a room in the iMatch application.
reset
Summary of Contents for ECO-prestige 75
