kaivac
cleaning
systems
TM
P a g e ǀ
1 4
1-800-287-1136
Customer/Technical Support
2.2 p
RepARAtion
f
oR
U
se
2.0 Assembly
2. Prepare the cleaning solution you will
be using by attaching the chemical
feed line and cap to the top of your
chemical bottle. Then select the proper
metering tip. (See placard for metering tip
information)
4. If using a cleaning product that foams,
use a foam inhibitor to cut excess. Pour
2 capfuls of inhibitor in the Vac Hose with
Vac running to coat inside of Hose.
5. Check all hoses and spray lines for
damage prior to use. If damage is found,
do not continue until proper repairs are
completed.
6. Plug in machine and test GFCI (Ground
Fault Circuit Interrupter) to ensure it is
working properly. You are now ready.
3. Check machine for all tools and supplies
needed to complete task. See
Tool
Arrangement
in Section 2.2 of this
manual.
1. Fill machine with clean, cool water.
Reset
