Tigertop™ – Installation Instructions
Secure Bow Assembly
Vertical Retainer
Mount
Front
Outside of Vehicle
Horizontal Rod
Vertical Rod
Front
Bow
Rear
Bow
Foam
Foam
Slide Bow
Halves Together
Vertical
Rod
Install Top on Vehicle
For best possible installation, check to
make sure that the soft top is perfectly
centered on the vehicle.
Locate the top and orient it on the vehicle. Drape
the top over the bows and insert the plastic strip
along the front edge of the top into windshield
retainer. Center the front of the deck on the vehicle
so that it is an equal distance from the top of the
windshield flange on both sides. Locate the Buckle
Straps in the parts kit. Wrap each strap around the
corners of the Rear Bow and snap the straps to
themselves. These straps will hold down the Rear
Bow when the Rear Curtain and Side Panels are
rolled up.
Vertical
Mount
With the bow halves lying on the rear of the vehicle
body, start the male end of one assembly into the
female end of the other assembly until they snap to-
gether. Slide the foam halves together over the joint
in the bow until they touch. Rotate the Front Bow
forward and slip the Vertical Rods into the Vertical
Retainer Mounts. Slip the Horizontal Rod into the
Front Rod Retainer.
Front Rod
Retainer
Horizontal
Rod
Fabric
Windshield
Retainer
Reinforced
Front Edge
