Tigertop™ – Installation Instructions
Install Door Channels and
Door Hinges – If Necessary
Install Front Rod Retainers
Place the Front Rod Retainers 1 1/2" above the
existing door channel and flush with the outside
edge of the windshield frame. Use the retainer as a
template to mark, center punch and drill two 5/32"
holes in the windshield frame. Install the Front Rod
Retainer with two #10 x 1/2" Sheet Metal Screws.
Do this on both sides of the vehicle.
Front Rod
Retainer
#10 x 1/2" Sheet
Metal Screws
1 1/2"
Door
Channel
CJ5 and M38A1 vehicles will use the existing Door
Channels and Door Hinges. If, for some reason,
the channels have been removed, install the Door
Channels and Door Hinges in the parts kit. Orient
the Door Channels with the "tails" down and the flat
surface toward the inside of the vehicle. Install the
Door Channels in the existing holes using four #10
x 1/2" Pan Head Sheet Metal Screws for each side.
Install the Door Hinges in the existing holes, using
the existing bolts (or screws).
If your vehicle has this type of Door
Hinge, replace it with one from the
parts kit.
Door Hinge
Door Channel
Windshield
Use existing bolts or
screws and holes
View from Inside Vehicle -
Passenger Side Shown
#10 x 1/2" Pan Head
Sheet Metal Screws
#10 x 1/2" Pan Head
Sheet Metal Screw
