Kaiser Fototechnik Kaiser RSP 2motion Operating Instructions Manual Download

Page: 11 / 12

7. Maintenance and care

All the moving parts are designed to operate without regular
maintenance.

If it is frequently used, grease the spindle (10) from time to
time with the grease supplied, also when becoming more
noisy. Use only the Kaiser spindle grease (no. 000561200027).

If the travelling carriages (2a, 2b) show play, they can be read-
justed. (Please only do this if necessary.) Use the following
method. Undo the two front fixing screws (34) on both side
parts of the travelling carriage with the SW4 (4 mm) hex key.
Then tighten up the four adjusting screws (33) on the front
evenly with the SW2 (2 mm) hex key. Make sure you do not
overtighten the adjusting screws. Then tighten up the fixing
screws (34).

8. Changing fuse

The control boxes (11a, 11b) are equipped with a fuse. Before
changing it, pull out the mains plug. After pulling out the fuse
holder (12) you can replace the fuse. Use only the specified
fuse.

9. Specifications

Cross-section of column:       120 x 80 mm (4.7 x 3.1 in.)
Camera mounting plate:         130 x 130 mm (5.1 x 5.1 in.)
Mounting thread:   3/8“ and 1/4“, interchangeable
Operating voltage:    100 - 240 V, 50/60 Hz
Fuse:    T 4 A
Mains cable:   approx. 2.50 m (8.2 ft.)

RSP 2motion Column (5708):
Maximum load
  of camera carrier:    10 kg (22 lbs.)
  of base board:   15 kg (33 lbs.)
Base board: 129 x 89 cm (50.8 x 35 in.)
Height of column:    216 cm (85 in.)
Weight*: 58.9 kg (129.7 lbs.)

RSP 2motion Copy Stand (5710):
Maximum load
  of camera carrier:    10 kg (22 lbs.)
  of base board:   15 kg (33 lbs.)
Base board: 129 x 89 cm (50.8 x 35 in.)
Total height with column foot:  227 cm (89.4 in.)
Required floor space (WxD):  129 x 164 cm (50.8 x 64.6 in.)
Weight*: 83.7 kg (184.4 lbs.)

RSP Xtra Column (5709):
Maximum load
  of camera carrier:    15 kg (33 lbs.)
Height of column:    216 cm (85 in.)
Weight*: 33.3 kg (73.3 lbs.)

RSP Xtra Copy Stand (5711):
Maximum load
  of camera carrier: 15 kg (33 lbs.)
Total height with column foot:  227 cm (89.4 in.)
Required floor space (WxD):  83 x 140 cm (32.7 x 55.1 in.)
Weight*: 58.1 kg (128 lbs.)

* without control box(es) and without cable remote control(s)

10. Optional Accessories

5614 rePRO Wall Mount, for RSP column

5610 rePRO Base, for RSP column

4421 rePRO Adapter. For attaching R1 system camera arms

and Kaiser enlarger heads to the camera carrier

5627 Close-Up Adapter. Moves the camera mounting posi-

tion for approx. 15 cm (5.9 in.) downwards. 1/4“
mounting thread

Suitable lighting units (for fastening e.g. to the base board of
5710/5708, to the table for copying works 5712 or to the low
table 5630)
5652 RB 570 AX LED Lighting Unit, with thermo-manage-

ment, 2 x 272 SMD LEDs, 5600 K, dimmable

5641 Polarizers for 5652, 1 pair

5648 RB 100D LED Lighting Unit, 2 x 504 High CRI LEDs,

5600 K, dimmable

For RSP 2motion Copy Stand and Column (5710, 5708):
5717 Magnetic Subject Holders, 4 pieces

For RSP Xtra Copy Stand and Column (5711, 5709):
5712 Table for Copying Works, with 86 x 60 cm (33.9 x

23.6 in.) base board and casters, approx. 49 cm
(19.3 in.) high.

5630 Low Table, with 86 x 60 cm (33.9 x 23.6 in.) base

board, height: approx. 31.5 cm (12.4 in.) with casters
or 25 cm (9.8 in.) with feet

For

more information

see the Kaiser website at: