Item Symbol Meaning
13
Hot surface can cause burns!
➤ Let the machine cool down.
➤ Wear long-sleeved garments (not synthetics such as polyester) and protective
gloves.
15
Bearing damage due to re-greasing in standstill!
➤ Re-grease the bearings only with the motor running.
➤ For lubrication interval and volume required,please refer to service manual.
23
Serious injury or death can result from loosening or opening component that is un‐
der pressure and heavily spring loaded!
➤ Do not open or dismantle the valve.
➤ Call for authorized KAESER Service representative if a fault occurs.
24
Serious injury or death can result from loosening or opening component under pres‐
sure!
➤ De-pressurize all pressurized components and enclosures.
➤ Secure that machine keeps de-pressurized.
➤ Check that machine is de-pressurized.
25
Ear damage and burns can result from loud noise and/or oil mist when the safety
relief valve opens!
➤ Wear ear protection and protective clothing.
➤ Close all access doors and cover panels.
27
Risk of electric shock!
If the interrupter has tripped current-carrying components of the controller should be
examined and replaced if damaged to reduce the risk of fire or electric shock.
28
Risk of electric shock!
To maintain overcurrent short-circuit, and ground-fault protection, the manufactur‐
er's instructions for setting the interrupter must be followed to reduce the risk of fire
or electric shock.
29
Danger of falling or damage to the machine!
➤ Do not sit or walk on the enclosure.
➤ Do not place or store any load on the enclosure.
Tab. 27 Safety Signs
3.8 In emergency
3.8.1 Correct fire fighting
Suitable measures
Calm and prudent action can safe lives in the event of a fire.
➤ Keep calm.
➤ Give the alarm.
3
Safety and Responsibility
3.8
In emergency
ESD_2C_10357405_10–LIN_00 E
Service Manual Screw Compressor
ESD 442/14 bar (abs) SFC SIGMA CONTROL 2
23
Summary of Contents for ESD 442 SFC
