KAESER ESD 442 SFC, Technical Documentation Manual

Page: 264 / 413

Precondition Password level 2 is activated,
Menu
< Configuration> General > is selected (see 7.2.1).
1. Press the «DOWN» key repeatedly until
Time format is displayed as the active line.
8 9 p s i 0 8 : 1 5 1 7 6 ° F
5.1 General
Menu
Date/time
13:04:11 08:15:37
Europe/Berlin
·········
Date format DD.MM.YY
Time format hh:mm:ss
Current time format
2. Press «Enter» to switch into setting mode.
hh:mm:ss flashes.
3. Change the format with the «DOWN» or «UP» keys.
4. Press «Enter» to save the setting.
5. Press «Esc» repeatedly to return to the Main Menu.
Setting the pressure display units
Select your preferred display of the pressure unit:
Format Example:
bar 5.5 bar
hPa 5523 hPa
MPa 0.55 MPa
psi 80 psi
at 5.6 at
"Hg 162.9 "Hg
Tab. 48 Units of pressure
Precondition Password level 2 is activated,
Menu
< Configuration> General > is selected (see 7.2.1).
1. Press the «DOWN» key repeatedly until
Pressure unit is displayed as the active line.
8 9 p s i 0 8 : 1 5 1 7 6 ° F
5.1 General
Menu
Time format hh:mm:ss
·········
Pressure unit bar
Current unit of pressure
Temperature unit °C
·········
Display lighting
2. Press «Enter» to switch into setting mode.
The
bar parameter flashes.
7 Initial Start-up
7.2 Configuring the controller
9_9450 03USE
Service manual Controller
SIGMA CONTROL 2 SCREW FLUID 1.1.3
45