KAESER KOMPRESSOREN SX, Service Manual, Page: 78 / 122

Material Spares
Cleaning cloths
Precondition The supply disconnecting device is switched off,
the device is locked off,
a check has been made that no voltage is present.
The machine is fully vented, the pressure gauge on the oil separator tank reads 0 bar.
WARNING
There is risk of burns from hot components and oil.
➤ Wear long-sleeved clothing and gloves.
Fig. 27 Changing the oil separator cartridge
1
Oil filter
2
Direction to unscrew
3
Oil separator cartridge
Changing the oil separator cartridge
1. Unscrew the oil separator cartridge anticlockwise and wipe off any drops of oil.
2. Lightly oil the new filter's gasket.
3. Turn the oil filter clockwise by hand to tighten.
➤ Dispose of parts and materials contaminated with oil in accordance with environmental
protection regulations.
Start the machine and carry out a trial run
1. Close all access doors, replace and secure all removable panels.
2. Open the user's shut-off valve between the machine and the compressed air network.
3. Switch on the power supply and reset the maintenance interval counter.
4. Stop the machine after 10 minutes and visually check for leaks.
10 Maintenance
10.16 Changing the oil separator cartridge
68
Service Manual Screw Compressor
SX SIGMA CONTROL BASIC
9_6919 04 E