6. Tighten both locking levers.
■ Ensure that the teeth in the adjustment joints are fully engaged,
■ Manually tighten the locking lever.
■ Use a hammer to hit the locking lever to further tighten the lower serrated joints until the
bore and the groove for the splint pin are aligned.
7. Insert both split pins.
Further information See chapter 2.4.4 for the tightening torque.
Check the towbar adjustment
➤ Check if:
■ the teeth in the tow bar adjustment joints are fully engaged,
■ the locking lever is tightened,
■ the split pin is correctly inserted to secure the locking lever (see Pos. 8 in Fig. 26).
Further information See chapter 6.4.2 for towbar height adjustment.
6.4.3.4 Option rc/ro/rt, rc/ro/rr
Changing the towing eye on a fixed height towbar (chassis 8818 lb)
Fig. 30 Changing the towing eye (fixed height towbar)
1
Self-locking hexagon nut
2
Hex-head screw
3
Towbar
4
Towbar
5
Towing eye
1. Unscrew the nuts
1
of both screw connections and withdraw the bolts
2
.
2. Remove the towing eye
5
from the towbar
3
.
3. Slide the new towing eye
5
onto the towbar
3
.
4. Position the various parts so that the bolts can be freely inserted.
5. Insert the bolts
2
through the corresponding fixing holes of both screw connections and secure
with self-locking nuts
1
.
Further information See chapter 2.4.4 for the tightening torque.
6
Installation
6.4
Adjusting the chassis
No.: 9_9570 07 USE
Operator Manual Screw Compressor
M250 SIGMA CONTROL MOBIL
71
Option rc/ro/rt, rc/ro/rr