Kabuto AERO-K1, Instruction Manual

Page: 20 / 21

Cleaning the linings
Linings are removable and washable. Keep linings clean by washing them periodically.
Use warm water (35°C or cooler) with small amount of hair shampoo or ph-neutral
detergent. Hand wash them gently and rinse thoroughly. Dry linings with a dry cloth after
washing, and leave them in a shaded and well-ventilated place. Avoid direct sunlight.
RIGHT WRONG
Wearing your helmet properly:
Wearing the helmet properly
5
Wear the helmet so it is level from front to back. Make sure the front of the helmet is just
above your eyebrows (check with a mirror).
It is important that the length of the chin strap and adjustable lock be adjusted for correct fitting.
Please make sure to read these instructions thoroughly before use.
Your helmet is only effective as protection in case of an accident if it is
positioned correctly on your head and the strap is fastened correctly.
Be sure you are wearing the helmet correctly before riding.
Attention!
Wear helmet level from front to back.
Linings used every day will wear out over time. Continuing
to use worn linings may lead to them breaking and causing
poor fit. Old linings should be replaced at an early stage.
Replacement AERO-K1 linings
Linings wear out over time!
Please check the model of your helmet before purchasing a lining set.
Attention!
The front of the
helmet is too far
up, and your
forehead is not
properly
covered.
Remember!
Make sure the front
edge of the helmet
is just above your
eyebrows
AERO-K1 Inner Pads Set (thickness: 5mm)
AERO-K1 Inner Pads Set (thickness: 10mm)
(One size fits all)
*Please check our website for the details.