Kabuto AERO-K1, Instruction Manual

Page: 15 / 21

Fastening the strap buckle
1
The strap buckles are fastened with the help of magnets.
Please use this strap buckle after understanding its structure.
●How to fasten the strap buckle ●How to unfasten the strap buckle
Strap
buckle
Push each part in opposite directions to unfasten
Strap
buckle
snap
sound
Adjusting the strap and adjustment locks
2
Try on the helmet before use
The length of the left side buckle of the user is not changeable.
Attention!
CAUTION!
Make sure to follow these instructions for
adjusting the strap. Otherwise, the strap
may become loose and the helmet may
come off.
CAUTION!
●
Make sure to fasten the strap firmly. It is dangerous to ride a bicycle without fastening
the strap. When fastening the strap buckle, be careful not to pinch your face or neck.
●
After fastening, pull the straps side to side to make sure that the strap buckle will not be
unfastened easily.
Adjusting the length of the strap
Adjust the strap to fit your head. It generally should be just long enough to leave
space for 2 to 3 fingers horizontally when fastening the strap.
Try on your helmet before riding, and adjust the length of the strap, the position of the
adjustment locks and the fit of the XF-1 Adjuster to fit the helmet to your head.
See: 3 Adjusting the XF-1 Adjuster for how to adjust the XF-1 Adjuster
Shorten
Lengthen
Strap buckle
Side view
Strap
Bind the strap with the rubber band at the end.
Make the two magnets on the strap ends attract to
each other, so that the buckle will be fastened.