Kabuto AERO-K1, Instruction Manual

Page: 16 / 21

1
Open the cover of
the adjustment lock
in the direction
shown by the
arrow.
2
Move the
adjustment lock up
or down to change
the position.
3
When the
adjustment lock is
placed properly,
close the cover
until you hear a
snapping sound.
2
A
Lock the cover securely after changing the position of the adjustment
locks. If the helmet is used without locking the cover securely, the
strap will be loose and the helmet may come off.
Attention!
Put on the helmet, fasten the strap buckle and adjust the adjustment locks so they can be
placed firmly on the side of your face. Check that the
A
part is placed correctly. If the strap
around your ears is loose or tight, change the position of the adjustment lock.
How to adjust the adjustment locks
1 3 1 3
Adjustment lock
Cover
Strap
How to change the
adjustment lock position
Correct position
of the strap
Adjustment lock
Adjusting the XF-1 Adjuster
3
XF-1 Adjuster is a mechanism at the rear of the helmet to keep the helmet from moving. Adjust
the XF-1 Adjuster so it keeps the helmet on your head securely.
First, loosen the XF-1 Adjuster dial, and then put on the helmet. Then, hold the front side of the
helmet against your head and tighten the adjuster dial. (See below)
Hold the front side of the helmet
and tighten the XF-1 Adjuster using
the adjuster dial.
Hold the front part and turn the dial.
Be careful with your hair, especially long hair, so it does not get
tangled in the XF-1 Adjuster.
Attention!
How to adjust the XF-1 Adjuster/the adjuster dial
Turn the dial to the left
Loosen Tighten
Turn the dial to the right