manualshive.com logo in svg

Kaba 90 40, Technical Manual, Page: 34 / 40

Share
Download
Kaba 90 40 Technical Manual Download Page 34

Commissioning

Technical Manual

34

04045088 - 11/2016

Kaba wireless gateway 90 40

Errors when updating the wireless gateway's firmware

When updating the device's firmware, errors can occur during various phases, which
affect the device's status in various ways. 
The table describes the update process, the rollback process and the device's status
in the various phases.

Phase

Success Status

Before 
update

A

The device before the update.

ZigBee
update

Yes

B

The update will continue with the firmware update.

No

A

The update has been interrupted. The ZigBee version
remains unchanged.

The update can be re-launched.

Firmware
update

Yes

C

The device is updated.

No

B'

It was not possible to produce a consistent firmware
and ZigBee status.

The firmware rollback mechanism is trying to restore
the previous firmware version.

Firmware
rollback

Yes

B

The firmware and ZigBee versions are inconsistent.

The ZigBee rollback mechanism is trying to restore the
previous ZigBee version.

No

F

In this status, the status LEDs signal that the device is
not able to fully complete the boot process [see
Chapter 

4.2.1

].

Send the device in for repair [see Chapter 

8

].

ZigBee 
rollback

Yes

A

Firmware and ZigBee versions have been restored to
the same status they had before the update.

No

F'

The firmware and ZigBee versions are inconsistent.

Access to the service interface and communication
with the host system are blocked.

Send the device in for repair [see Chapter 

8

].

Summary of Contents for 90 40









































Reviews:

No comments