Kaba 90 40, Technical Manual, Page: 29 / 40

Technical Manual Commissioning
29 04045088 - 11/2016 Kaba wireless gateway 90 40
6.2.9 Ethernet network
Function call: Settings > Ethernet network
UPnP
In its factory state, Universal Plug and Play (UPnP) is activated for easy localisation in
the Ethernet network [
}
6.1] .
Deactivate UPnP by turning the UPnP switch to Off .
Assigning a fixed IP address
In its factory state, DHCP is activated.
1. Deactivate DHCP by turning the DHCP switch to Off .
2. Enter the desired address in the IP address field.
3. Under Subnet mask, select a network mask.
4. Under Standard gateway you have the option to enter the IP address of the Eth-
ernet gateway, which enables communication with the host system if the devices
are not located in the same network segment.
5. Under DNS address , you have the option of entering the IP address of a DNS
server.
6. Select Save .
Get the IP address from the DHCP server
1. Activate DHCP by turning the DHCP switch to On .
2. Select Save .
Default IP address 172.16.99.98
To guarantee the accessibility of the wireless gateway, the device reverts to its de-
fault IP address if there is no DHCP server in the network or if the DHCP server does
not respond.
The device
signals [
}
4.2.1]
the activation of the default IP address.