manualshive.com logo in svg

Kaba 90 40, Technical Manual, Page: 26 / 40

Share
Download
Kaba 90 40 Technical Manual Download Page 26

Commissioning

Technical Manual

26

04045088 - 11/2016

Kaba wireless gateway 90 40

Edit

Function call: 

Menu 

> 

Wireless components 

> 

Details 

> 

Edit

Identified wireless components can be given a name to link them to a fixed installa-
tion location. The changed name, e.g. 'server room', is displayed in the wireless gate-
way's service interface and transmitted to the wireless components.

The host system can overwrite the name specified in the wireless gateway, if the
wireless gateway is registered and configured in the system.

Disconnect

Function call: 

Menu > Wireless components > Details > Disconnect

This function disconnects the selected component from the secured wireless net-
work.

Effects on wireless components

Disconnecting wireless components from the secured wireless network does not re-
set their settings. At these control points, access control continues in the same status
as before disconnection.

Carry out an updates to wireless components' firmware

Function call: 

Menu 

> 

Wireless components 

> 

Details

ü

The battery's charge level is sufficient for the updating process.

ü

The wireless component to be updated can be accessed via radio.

1. Load the firmware on to the 

wireless gateway [

}

 6.2.12]

.

2. Select 

Update

.

ð

The firmware will be transmitted via radio to the relevant wireless compon-
ent. It can take up to 60 minutes for the firmware to be transferred.

ð

The service interface reports whether the update was successful.

The wireless gateway supports the parallel update of several wireless components.

Summary of Contents for 90 40









































Reviews:

No comments