Page 2
Revision level 06.06.2008
Operating Instructions 70094 Convar F / 70096 Convar B
•
Continue to turn the key until stop-position (approx. 180°) is reached (see diagram 5). The key can be removed in this
position.
•
Remove the key and insert a new key (long bit right).
Diagram 5: Key position approx. 180°
•
Turn the key anti-clockwise until stop position (approx. 80°) is reached (see diagram 6).
•
Then turn the change activator at the back of the lock until stop position is reached and withdraw the activator (see
diagram 7)
Diagram 6: Key position approx. 80°
Diagram 7: Turn change activator
•
Turn the key now anti-clockwise until stop position (approx. 0°) is reached (see diagram 8). The lock is locked and changed
over to a new locking. Remove the key.
Diagram 8: Key position approx. 0°
