![background image](http://html1.mh-extra.com/html/emtek/in4/in4_installation-manual_2404966001.webp)
Installation Guide - Keyed Pocket Door Mortise Lock,
Classic
Trim
Install Lock Body
Install Drive Bar Cylinder
Mount Outside Plate
Mount Inside Plate
Install Trim Plate
Thread Key Cylinder
Install Door Jamb
Tighten Drive Bar Cylinder
See template for door prep
specifications
Inside
Note: Notch on cylinder must be
in the 9 o’ clock position when
fully screwed into lock body.
Install Key Cylinder by
threading it clockwise
onto lock body plate
Key Cylinder notch
must be at the 3 o’clock
position when fully
screwed in lock body.
Tighten locking screw to engage
notch on cylinder
See template for door jamb
prep specifications
Drill two 7/64”
pilot holes
7
5
8
6
4
3
2
1
IN4-POCKETMORTISEKYD REV.
D