23
!
Front and rear rails can be offset to facilitate rail alignment and/or hide rail. Clamps may
be used with or without the Add-On in this type of configuration. All intermediary rail
between front and last rows must be aligned carefully using the steps outlined above.
13b
14
!
To attach WEEB Lug 10.3, insert T-Bolt into side channel of CrossRail and
rotate clockwise 90º. Tighten serrated hex nut to 15 ft-lbs (20.3 Nm). Insert a
#6 or #8 AWG solid copper wire and tighten terminal screw to 5 ft-lbs (6.7 Nm).
Summary of Contents for CrossRail Shared Rail System
Page 24: ...24 Notes ...
Page 25: ...25 Notes ...
