22
13a
!
Push pins of appropriate end cap into end of rail.
!
12
Insert the MK3 Slot Nut of the preassembled Everest Ground Lug into top channel of CrossRail. While slightly lifting
the plastic tabs, rotate 90º clockwise to engage into rail channel. Ensure bonding teeth are perpendicular to the rail
channel. Torque to 10 ft-lbs. Insert a #6 or #8 AWG solid copper wire and tighten terminal screw to 35-60 in-lbs.
Please note if the Everest Ground Lug is used on a rail that is shared, it must be outside of the modules on the end
of the rail. It can be used on one of the non-shared rails underneath the module or on the outside.
Summary of Contents for CrossRail Shared Rail System
Page 24: ...24 Notes ...
Page 25: ...25 Notes ...
