K-Rain RPS469, Instruction Manual

Page: 20 / 36

sPecIal FunctIons
PuMP on/oFF selectIon
In most systems the water supply will be from a well or from the mains. This controller will turn on
either a pump (well supply) or master valve (mains supply) each time an automatic or manual start
occurs. Normally the pump or master valve is activated for all stations. However if there is a dual
water supply or some of the stations may be used to run garden lights, the pump master valve may
need to be turned off for selected stations. Pumps can be assigned to be activated by a program or
alternatively by individual stations. The standard default is that all programs are set to pump
“ON” .
To set pumps per program:
Turn the dial to “Set Auxiliaries” . Press the button once.
The DiSplay Will ShoW:
This means we are in the pump per program menu for Pump
No 1 (master valve). Press the
button to enter this menu
option. Program 1 will now be flashing.
The DiSplay Will ShoW:
This means that the pump will turn on when program 1 is running.
To select a different program number press the or
the button. To turn a pump ON or OFF for a particular
program press the
button so that
“ON” is now flashing.
Press the button to turn the pump ON or press the
button to turn the pump OFF for that particular number.
Complete this sequence for all program No’s.
To set pumps per stations:
Turn the dial to the “Set Auxiliaries” position. Press the
button twice and the pump per station menu will be displayed.
The DiSplay Will ShoW:
This means we are in the Pump per Station menu for Pump No 1 (master valve).
Press the
button to enter this menu option.