1. Turn the dial to “OFF”
When the dial is in the “OFF” position no
watering occurs. The display will show “OFF,”
the time of day and day of the week.
NOTE:
Pressing any button will momentarily
display the current “REVISION NUMBER,”
“K-RAIN” or full display screen.
SET CONTROLLER TO RUN AUTOMATICALLY
1.Turn the dial to “AUTO”
When the dial is in the “AUTO” position
the controller will run in automatic mode.
The display will show the selected program,
the day of the week and the time of day.
The controller will turn on automatically to
meet ANY programmed water schedules.
The Pro-LC controller has three
separate programs, A, B and C.
Multiple programs allow valves
automatic operation with different
watering days and start times.
You can program any valve to run in
one or more of the three programs.
1. To select a program, press the
PROGRAM select button on the front
panel to select program A, B or C.
2. The display briefly shows the
program selected.
3. The selected program then appears
on the left side of the display.
4. Any programming instructions
entered will apply only to the
selected program.
04
SETTING THE CONTROLLER TO OFF
PROGRAM SELECT BUTTON
OFF 9:10
AM
FRI
FRI 9:09
AM
a
pgm
