www.krain.com
The Pro-LC controller allows the user a quick and
simple method for checking all available stations by
running a test program. This feature operates each
station individually in numerical order starting with
the lowest available station.
Station operation is preset for a two minute run time
which the user can alter at anytime during the test.
1. Turn the dial to SYSTEM TEST. Display will show
selected program and “SINGLE.” Press UP or
DOWN buttons until display shows “TEST.”
2. Press the MANUAL START button to begin the
test feature. The display will now show “RUN”
along with its remaining run time for the first
available station.
3. To change default test time press UP or DOWN.
While the test program is running the display
shows the station number currently operating,
along with its remaining run time. The controller
will run each station in numerical sequence.
4. Press the NEXT button to manually advance to
the next available station.
NOTE:
Changing the test run time can be done
at any time and for any station during the test.
Any change to the test run time becomes the
new default for all stations.
TEST ALL STATIONS
11
TEST
