2962P POWERFLEX SPEEDTILLER OPERATOR & SAFETY MANUAL
31
The disc positioning system is used for maximum soil
disturbance, reduced ridging and weed control.
Adjustment can also be made to compensate for disc wear.
ADJUSTMENT PROCEDURE
*NB
- Be sure machine is tracking in line before attempting
to make this adjustment.
Pg 30
Soil
Throw
Soil
Throw
Left
Right
Top Elevation
Adjustable
Front Gang
(A)
(A)
(B)
Move Front Gang
Right To Cut Out
(A)
Left To Cut Out
(B)
Cross Sectional View Of Soil Distrubance
LATERAL FRONT DISC GANG POSITIONING
• Start with factory settings.
Pg 32
• To remove any ridges, test run at normal operating
speed and stop quickly.
• Check for ridges of undug soil. Follow ridges into
machine and identify which direction to adjust.
See
diagrams on this page
• Only adjust front sideways in small increments ½” or
12mm.
• Re-check in hard soils as jump arms tend to flex more.
Remember, Full ground disturbance starts at 2 ½”
60mm
F I E L D O P E R A T I O N
Figure 37
Figure 38
Figure 39
REAR VIEW OF DISC PROFILE
Figure 40
2962P op & safety manual.indd 31
2962P op & safety manual.indd 31
21/03/2020 8:17:37 AM
21/03/2020 8:17:37 AM
