2962P POWERFLEX SPEEDTILLER OPERATOR & SAFETY MANUAL
34
USEFUL HINTS
*NB -
INCHES DISPLAYED DO NOT INDICATE DIGGING DEPTH
RAM STOP COMBINATIONS
FIELD OPERATION
Figure 44
1. Cross working at 15 degrees off line gives better leveling and trash clearance.
2. Full ground disturbance starts at 63.5mm (2.5 inches).
Adjustment should be made to compensate for disc wear and concavity.
3 To improve weed control and for better soil
disturbance.
• Adjust lateral disc positioning.
• Ensure machine is traveling in line.
• Increase depth to cut.
• Replace discs.
BLOCKING IN EXCESSIVE TRASH
• Lower rear discs gang to drive better in soil.
• Adjust angle of lift soil deflector to allow greater flow.
• Try reducing speed slightly.
CLOGGING IN WET SOILS
1. Raise working depth.
2. Raise front discs.
3. Give soil more time to dry out.
EXTENSION DEFLECTOR ADJUSTMENT
• Slotted holes provided to allow for disc
extension adjustment for optimum furrow
filling.
Figure 45
2962P op & safety manual.indd 34
2962P op & safety manual.indd 34
21/03/2020 8:17:37 AM
21/03/2020 8:17:37 AM
