2962P POWERFLEX SPEEDTILLER OPERATOR & SAFETY MANUAL
23
1. Keep well clear when backing up to machine.
2. Shut down tractor.
3. Secure & lock drawbar pin in place.
4. Install safety chain by crossing the chains under
the tongue and secure to the drawbar hitch frame
of the tractor.
5. Clean all hydraulic couplings.
6. Hoses are color coded according to function
Pg 20
.
7. Beware of high pressure fluid.
8. Plug in hoses to respective remote ports.
9. Plug in electrical lead to tractor connection.
10. Release implement jack & store.
11. Check hydraulic cylinders are fully primed to avoid
serious injury or death.
12. See
Pg 21
to prime hydraulic system.
UNHOOKING
• Machine must be fully lowered or in transport
position with safety locks engaged.
• Use wheel chocks.
• Release hydraulic pressure from system.
• Lock Implement jack in place.
• Remove safety chains and drawbar pin.
If implement jack is damaged
DO NOT USE
, replace
immediately, or severe bodily harm may result.
HOOKING UP TO TRACTOR
Figure 23
Figure 24
Figure 25
SAFETY
2962P op & safety manual.indd 23
2962P op & safety manual.indd 23
21/03/2020 8:17:35 AM
21/03/2020 8:17:35 AM
