2962P POWERFLEX SPEEDTILLER OPERATOR & SAFETY MANUAL
19
• Always cage tires before seating beads.
• Never exceed stated pressures when
seating beads.
• Do not attempt to mount a tire unless
you have the suitable equipment and
experienced personnel.
• Inflating tires can be dangerous. Always
stand to the side when inflating.
• Failure to comply could result in serious
injury or death.
• Load ratings of replacement tires
should meet or exceed weight
requirements.
• Correct pressure is 90PSI/620KPA
(Center) 75PSI/517KPA (Wing).
• Before mounting wheel to machine,
check all hub and rim contact surfaces
are undamaged and free of paint, dirt
and grease.
• Lubricate wheel stubs with standard
viscosity oil.
• Tension wheel nuts to 350ft/lbs
/474nm.
• For field operation: Re-tension after
1st, 5th, then every 50 hrs of
operation.
• For road travel re-tension first 3 miles
(5kms), 10 miles (15kms), and
thereafter at 25 miles (40kms) intervals.
SERVICING PROCEDURES
TIRE PRESSURE
Center:
90PSI / 620KPA
Wing:
75PSI / 517KPA
Wheel Nut Tension:
350ft lbs / 474 nm
Tire Pressures When Fitted With Standard
22.5 Inch Tires
When optional flotation tires are fitted
use tire pressures stated on the tire. If
no pressure stated use 50/55 PSI.
Figure 16
Figure 17
Figure 18
TIRE SAFETY &
P R E S S U R E S
2962P op & safety manual.indd 19
2962P op & safety manual.indd 19
21/03/2020 8:17:32 AM
21/03/2020 8:17:32 AM
