KNX/EIB
KNX Gateway for IR
2
The functions of KNX gateway for IR are summarized as followed:
Support Universal IR control, up to 30 IR codes can be configured for each channel
Support Air-condition control, up to 266 IR codes can be configured, control functions
include: ON/OFF, temperature, mode, fan speed, swing
Support current detection function, up to 10A, can be associated to the transmitting
channel
(Only KNX Gateway for IR,Flush mounted supports the function)
Support up to 16 sequence controls, each sequence supports up to 4 IR commands to be
transmitted by step
Support transmit with several times or delay time
KNX Gateway for IR,Flush mounted and KNX Gateway for IR,Ceiling only powered from KNX bus. It
is available to assign the physical address and configure the parameters by engineering design tools
ETS with .knxprod ( support edition ETS5.7 or higher ).
