![background image](http://html2.mh-extra.com/html/k-bus/btirf-02-00-2/btirf-02-00-2_user-manual_5083548028.webp)
KNX/EIB
KNX Gateway for IR
25
Parameter “Enable step x command”(x=1~4)
This parameter is for setting whether to enable command x(x=1~4). The setting of command x is
visible when enabled. Options:
Disable
Enable
——Parameter “IR code NO. for emitting [1..300]”
This parameter is for setting the emission IR coed of command x, which is configured by
configuration software tool or DCA. Options:
1..300
——Parameter “Emitting channel”
This parameter is for setting the emission channel connected with command x. Options:
CH1
CH2
——Parameter “Delay time for emitting [0..255]*0.1s”
This parameter is for setting the delay time for command x emitting IR code. Options:
0..255
——Parameter “Count of emitting [1..100]”
This parameter is for setting the count for command x emitting IR code. Options:
1..100