KNX/EIB
KNX Gateway for IR
13
Parameter “IR control x”(x=1~30)
This parameter is for setting whether to enable IR control, display the relevant window after
selected. Each channel up to support 30 IR controls.
Parameter “Description (max 30char.)”
This parameter is for setting the custom description of IR code, and the description of
corresponding setting window and object name will also change. Up to 30 characters can be input.
Parameter “Object datatype of trigger value”
This parameter is for setting the object datatype for triggering the IR code emit. Options:
1bit [On/Off]
1byte [0..255]
——Parameter “Trigger value”
This parameter is for setting the received value when IR code emission is triggered. The value is
based on the trigger object datatype:
When select 1 bit, options:
1 [On]
0 [Off]
Both 1 and 0
When select 1byte, options:
0..255
Parameter “Assign an IR code NO.[1..300]”
This parameter is for setting the emitted IR code, with a total selection of 300 IR codes. Options:
1..300
Parameter “Delay time for emitting [0..255]*0.1s”
This parameter is for setting the delay time of IR code emission. Options:
0..255
Parameter “Count of emitting [1..100]”
This parameter is for setting the count of IR code emission. Options:
1..100
