KNX/EIB
KNX Gateway for IR
14
Parameter “Emitting IR code when current status is”
This parameter is visible when the current detection status is selected “Local” or “External”. Set
whether to emit IR code according to the current status. Options:
1 [On]
0 [Off]
Both 1 and 0
1 [On]: if current status is ON, emit IR code, otherwise not.
0 [Off]: if current status is OFF, emit IR code, otherwise not.
Both 1 and 0: both emit when the current status is On or Off.
Parameter “Status response”
This parameter is for setting whether to reply a status value to the bus after the device emitting IR
code, to inform emission is completed. Options:
No
Response value '1'
Response value '0'
According control value
No: no responding;
Response value '1': object “IR Response value” replies the telegram value “1”;
Response value '0': object“IR Response value”replies the telegram value“0”;
According control value: object“IR Response value” the telegram value of response is the same as
trigger value.
