10
2�2 Installing the Module
1. Turn off the PXIe system/chassis and connect the power cable from the power source.
Connection of the power cable provides grounding to prevent hazardous ESD (electrostatic
discharge).
2. Align the module’s edge with the module guide in the PXIe chassis.
3. Slide the module into the chassis until resistance is felt from the PXIe connector.
4. Push the ejector latch upwards and fully insert the module into the chassis.
5. Once the module is fully seated, a “click” can be heard from the ejector latch.
6. Tighten the screw on the front panel.
7. Power up the PXIe system/chassis.
The red ejector latch lock must be depressed before the module can be uninstsalled.
