1-20
XL-R5000BK
Explanation of Service menu
1. READ RID CODE
When this menu item is executed, the RID code is read out and it is shown by the FL tube for 5 seconds. This selection is
automatically cleared after the 5-second display.
Example of display: JVCCA01089231
Manufacturer code: JVC
Type code: CA01
Unique No.: 089231
2. ENG SETUP
Explanation of this item is omitted because of the confidential function.
3. 3CD FC ADJ (3CD focus automatic adjustment value readout) (000000F7)
When this menu item is executed, the 3CD unit focus automatic adjustment value (hexadecimal number in six figures) is dis-
played by the FL tube for 3 seconds. This selection is automatically cleared after the 3-second display. When the set fails in
reading out the 3CD unit focus automatic adjustment value, a message "NG" is shown for the value to be read.
4. 3CD TRK ADJ (3CD tracking automatic adjustment value readout) (00000FA)
When this menu item is executed, the 3CD unit tracking automatic adjustment value (hexadecimal number in six figures) is
displayed by the FL tube for 3 seconds. This selection is automatically cleared after the 3-second display. When the set fails in
reading out the 3CD unit tracking automatic adjustment value, a message "NG" is shown for the value to be read.
5. READ CDR C1 (CDR C1 error rate readout)
When this menu item is executed, the CDR is set to the play mode with display of the C1 error rate. To escape from this menu
item, switch off the set.
6. CDR SELFDIAG (CDR self-diagnosing)
When this menu item is executed, the set carries out self-diagnosing of the CDR. When nothing wrong is detected by the self-
diagnosis, a message "DIAG OK" appears on the display. To quit this self-diagnosing mode, switch off the set.
7. SYSTEM AGING (Running operation)
When this menu item is executed, the set automatically starts the following running operation. For executing this item, it is
required to set a blank CD-RW disk in the CDR beforehand. The time required for a running operation or number of times of pick
movement can be controlled by changing the data written on the disc set on the current tray of the 3CD.
(When the running operation starts without disk, "000CD 1ACOPY" is shown on the display.)
One time disk dubbing (COPY)
Play of CDR until readout is complete (PLAY)
Erasure of CDR from disk (ERAS)
If the set receives an effective input from the key, remote controller or DCS, it immediately stops the running operation. If the running
operation is suspended by the STOP key or because of an error, the following message is continuously displayed until the set is
switched off.
8. READ VERSION (Version number readout)
When this menu item is executed, version numbers of the syscon, CDR farm and 3CD farm are shown by the FL tube for 5
seconds. This selection is automatically cleared after the 5-second display.
Each version No. is set apart from the other(s) by a space.
A 3-digit number is shown as *.**. The last two digits are shown in the decimal places.
When the set fails in reading out a version number, "000" (three zeros) is shown for the version number to be read.
Classification of the unit in which
an error breaks out
CDorCDR
Error code (hexadecimal number in two
figures)
000CD
Operation executed last
COPYorPLAYorERAS
Number of execution times (4-digits
decimal number)
1ACOPY
Syscon version No. (in 3 digits)
CDR farm version No. (in 3 digits)
3CD farm version No. (in 3 digits)
www.freeservicemanuals.info
12/23/2018
Digitized in Heiloo the Netherlands
Not for sale!
