79
䡵
Receive
For specifying settings related to receiving of audio sound sent from the
camera.
A
Receive
For specifying whether to receive audio sound. Select
A
On
B
to receive
audio sound.
B
Stream
For selecting the stream format of the received audio sound.
When
A
HTTP
B
is selected, lost packets are recovered via resending. When
A
Multicast
B
is selected, you can monitor the audio sound of the camera
using a multiple number of client PCs. During receiving via multicast., start
multicast sending on the [Streaming] page. (
Note:
●
When the built-in viewer is launched with
A
Multicast
B
specified, a
Windows firewall warning may appear. In this case, select
A
unblock
B
and
proceed.
●
If
A
block
B
is selected, the Windows firewall will block the multicast
stream and playback of multicast by the viewer will fail.
C
Multicast IP
Address
You can change the multicast IP address.
The default address is 225.0.3.1.
Specify the same value as the parameter that is set on the [Streaming]
page of the camera. (
D
Multicast Port
You can change the multicast port number.
The default port number setting is 39152.
Specify the same value as the parameter that is set on the [Streaming]
page of the camera. (
䡵
Speech
For specifying settings for sending audio sound to the camera from the
computer.
A
Destination
Port
You can change the destination port for sending audio sound to the camera
from the computer. The default port number setting is 49298
䡵
Common
For specifying the HTTP port settings
A
HTTP Port
For changing the port number during access to the camera from the client
PC via HTTP.
The default port number is 80.
Specify the same value as the parameter that is set on the Protocol.
(
