1-38
UX-A10DVD
Reattaching the head mount assembly.
1.
Tighten the azimuth screw for reversing.
Reattach the spring from the back of the Play/
Record & Clear head.
Connect the flexible wire to connector CN31 on the
head amplifier & mechanism control board.
2.
3.
4.
1)
2)
Reattaching the Play/ Record & Clear
head (See Fig.11~13)
Change front of the direction cover of the head
mount assembly to the left(Turn the head forward).
Fit the bosses
O'
,
P'
,
Q'
,
U'
and
V'
on the head
mount assembly to the holes
P
and
V
, the slots
O
,
U
and
Q
of the mecha sub assembly(See Fig.11
to 13).
To remove the head mount assembly,
turn the direction cover to the left to
disengage the gear. If the gear can not
be disengaged easily, push up the boss
Q'
slightly and raise the rear side of the
head mounts slightly to return the
direction lever to the reversing side.
CAUTION:
O'
P'
V'
U'
Q'
Direction cover
Direction cover
Head mount assembly
Head mount assembly
Azimuth screw for reversing
Head mount
Spring
Flexible wire
Head amplifier &
mechanism control board
CN31
Head
Fig.11
Fig.12
Fig.13
O
P Q
U
V
Summary of Contents for UX-A10DVD
Page 89: ...1 89 UX A10DVD M E M O ...
