EN
25
H
Other Useful functions for playback
(S-VHS/VHS only)
You can also use the following functions for playback.
●
Video Calibration (S-VHS/VHS only) (
pg. 49)
When this function is set to “ON”, this VCR checks the
condition of the tape in use during playback and
recording, and compensates to provide the highest-
possible pictures.
●
Picture Control (
pg. 49)
This function helps you to adjust the playback picture
quality according to your preference.
●
Digital R3 (
pg. 49)
This function applies edge correction to the luminance
signal to enhance details and provides clear pictures.
●
Video Stabilizer (
pg. 49)
You can automatically correct vertical vibrations in the
picture when playing back unstable recordings made on
another VCR.
Adjusting picture condition
— Digital 3-DNR (S-VHS/VHS only)
The Digital 3-DNR (3-Dimension Noise Reduction) cuts
noise and reproduces clear pictures. Normally turn on
Digital 3-DNR.
The playback picture may be distorted depending on the
tape. In this case, turn off Digital 3-DNR.
Press DIGITAL 3-DNR on the front panel so that the
DIGITAL 3-DNR lamp lights up.
Each time you press the button, this function turns on
and off.
J
Locating beginning of timer
recordings
— Instant Review
At the press of a button, you can turn on the VCR,
rewind the tape and begin to view the most recent timer-
recorded program.
Press REVIEW on the Remote after ensuring that the
VCR is in the timer recording standby mode.
●
The VCR turns on, and rewinds to the index code
indicating the beginning of the last timer-recorded
program, then begins playback automatically.
●
You can access a program of 2 to 9 index codes away
from the current position on the tape. If, for example,
you have 5 programs recorded and you want to watch
the third one, press
REVIEW
three times.
●
If you want to find the very beginning of the desired
program, press
REW (
)
or
FF (
)
or turn the
SHUTTLE
ring after playback starts.
●
If the tape is already rewound when
REVIEW
is
pressed, it will play the tape from the beginning. It will
not fast-forward to an index code.
●
The Instant Review function will also operate if the
VCR is turned on.
Skipping unwanted portions
— Skip Search
You can skip over (view at high speed) unwanted
portions of the tape.
Press SKIP SEARCH on the Remote once to 4 times
during playback.
Each press initiates a 30-second period of high speed
playback (up to 2 minutes). When the specified portion
of the tape is skipped, normal playback resumes
automatically.
To return to normal playback during Skip Search,
press
PLAY
(
3
)
.
I
VDA300U-EN21-33
03.7.18, 12:11 PM
25
